Heat insulation jacket single seat control valve

Size: DN10-600(3/8”-24”)
Bonnet: standard ,heat dissipation ,cryogenic ,bellows
Characteristic: equal percentage ,linear quick open
Pipe connection: flange,butt welding type
Actuator: pneumatic diaphragm actuator,pneumatic piston actuator,electric actuator

Category:

Description

heat insulation jacket single-seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, S type flow channel, low pressure drop loss, high flow coefficient, wide adjustable range, high flow characteristic precision, etc.

The cage adopts the press-in type seat design, which solves the problems of difficult disassembly and high leakage of the traditional thread screw-in type seat and prolongs the service life. The flow to open design is adopted, and the medium flow direction tends to the opening direction of the valve with good controllability of small opening and low flow characteristic distortion. Special cages with noise reduction and anti-cavitation functions can be offered according to the requirements in different service conditions. valves are of heat insulation jacket type, mainly used in applications where media such as paraffin may easily coagulate at normal temperature. Fill the heat insulation jacket with steam to heat the medium and maintain its flow.

Parameters of control valves

Trim features: top guided
unbalanced trim structure
quick disassembly type structure
Body type: straight-through type
Bonnet type: heat insulation jacket type
Flow characteristic: equal percentage
linear
quick open
Size: DN15-200(1/2”-8”)
Pressure class: PN1.6、4.0Mpa(ANSI 150、300LB)
Leakage class: ASME B16.104 Ⅴ(standard type seat)
Pipe connection type: flange type
Applicable temperature range: -45C°~ 550C°
Actuator type: pneumatic diaphragm actuator
pneumatic piston actuator
electric actuator