Clamp stainless steel pneumatic angle seat valve

1.High cycle life
2.Cost effective ball valve alternative
3.High operating safety:
4.Maintenance–free spring loaded packing with intermediate relief and wiper
Self aligning PTFE seal/plug
Optical position indication standard
5.Cost–savings in operation due to minimized control air consumption
6.Low Lifecycle costs

Body: SS304,SS316,SS316L
Stem: SS304,SS316,SS316L
Pneumatic actuators:PA, stainless steel
Seats: PTFE
Ends: Clamp
Air pilot pressure:0.6Mpa
Size: 3/8″ – 4″ (10mm – 100mm)
Ambient temperature: PA: -40 °C to + 60 °C ; stainless steel: -40 °C to + 80 °C
Control medium:Neutral gases, air
Temperature range: -40 °C to + 180 °C (depending on pressure, medium and material)
Body style: Y type
Applications: Water, alcohol, oils, fuel, salt solution, alkali solutions,organic solvents,steam at 150 PSI / 365

Pneumatic Actuator
Control: Double acting,
Single acting normally closed
Single acting normally open
Pneumatic accessories: Solenoid valve, limit switch box , filter, E/P positioner, hand wheel